Resistor and capacitor markings
Colour bands and SMD codes of resistors, capacitor codes. It works both ways: the value from the code and the code from the value.
Band 1: digit
Resistance
kΩ4.7 kΩ
- Tolerance
- ±5 % (J)
- Actual value
- 4.465 kΩ … 4.935 kΩ
- Value series
- E24
- Bands
- yellow, violet, red, gold
Band colours per IEC 60062
| Colour | Digit | Multiplier | Tolerance | TCR, ppm/K |
|---|---|---|---|---|
| black | 0 | ×1 | 250 | |
| brown | 1 | ×10 | ±1 % (F) | 100 |
| red | 2 | ×100 | ±2 % (G) | 50 |
| orange | 3 | ×1 kΩ | ±0.05 % (W) | 15 |
| yellow | 4 | ×10 kΩ | ±0.02 % (P) | 25 |
| green | 5 | ×100 kΩ | ±0.5 % (D) | 20 |
| blue | 6 | ×1 MΩ | ±0.25 % (C) | 10 |
| violet | 7 | ×10 MΩ | ±0.1 % (B) | 5 |
| grey | 8 | ×100 MΩ | ±0.01 % (L) | 1 |
| white | 9 | ×1 GΩ | ||
| gold | ×0.1 | ±5 % (J) | ||
| silver | ×0.01 | ±10 % (K) | ||
| pink | ×0.001 | |||
| no band | ±20 % (M) |
Read the bands from the end they are closer to. The tolerance band usually sits apart or is wider than the rest. 5 and 6 bands carry three digits, 4 bands two.
How to read the markings
A three-digit code on an SMD resistor is two significant digits and a number of zeros: 103 = 10 and three zeros = 10 kΩ. A four-digit code is used on ±1 % resistors and has three significant digits: 1002 = 100 and two zeros = 10 kΩ. The letter R stands in place of the decimal point: 4R7 = 4.7 Ω, R100 = 0.1 Ω. An EIA-96 code of two digits and a letter is printed on ±1 % resistors: the digits give the value's number in the E96 series, the letter the multiplier.
A capacitor code is read in picofarads by the same rule: 104 = 100,000 pF = 100 nF = 0.1 µF, 474 = 470 nF = 0.47 µF. A letter after the code gives the tolerance per IEC 60062: J ±5 %, K ±10 %, M ±20 %. A digit with a letter is an EIA voltage code, the digit gives the order and the letter the mantissa: 1H = 50 V, 2A = 100 V, 2J = 630 V. Markings like "2A104J" and "104J630V" can be entered in the capacitor field as they are, run together or with a space.
A resistor with 4 bands has two digits, a multiplier and a tolerance; with 5 bands, three digits; with 6 bands, the sixth band gives the temperature coefficient.
Examples
- Capacitor 2A104J: 2A is 100 V, 104 is 100 nF, J is ±5 %. Capacitor 104J 630V: 100 nF ±5 % at 630 V. Capacitor 474J: 470 nF ±5 %.
- A resistor with bands brown, black, orange, gold: digits 1 and 0, multiplier ×1000, tolerance ±5 %, so 10 kΩ.
Common mistakes
- People read 4R7 as 47 Ω. The letter R stands in place of the decimal point, so the value is 4.7 Ω.
- People read the bands from the tolerance end. The first band then comes out gold or silver, and there are no digits for those colors.
FAQ
- Capacitor 104: how many µF and nF is that?
- 104 is 10 followed by four zeros in picofarads: 100,000 pF = 100 nF = 0.1 µF.
- Which end do I read a resistor's color bands from?
- From the edge the bands are closer to. The tolerance band, more often gold or silver, stands apart or is wider than the others and is read last. If the first band comes out black, the resistor is most likely turned around.
- What do 01C, 4R7 and R100 mean on an SMD resistor?
- 01C is an EIA-96 code: number 01 corresponds to the value 100 in the E96 series, the letter C to the multiplier ×100, which gives 10 kΩ ±1 %. In 4R7 and R100 the letter R stands in place of the decimal point: 4.7 Ω and 0.1 Ω.
- What do the letters J, K, M and the code 2A on a capacitor mean?
- The letter after the capacitance code gives the tolerance: J ±5 %, K ±10 %, M ±20 %. 2A is an EIA voltage code, 1.0 × 10² = 100 V. Other common codes: 1H = 50 V, 2E = 250 V, 2J = 630 V.
- What is the difference between 103 on a resistor and on a capacitor?
- The rule is the same: two digits and a number of zeros. A resistor is read in ohms, so 103 = 10 kΩ. A capacitor is read in picofarads, so 103 = 10,000 pF = 10 nF.
- How do I convert pF to nF and µF?
- 1 nF = 1000 pF, 1 µF = 1000 nF = 1,000,000 pF: 470,000 pF = 470 nF = 0.47 µF. The calculator shows the capacitance in all three units at once.
You might also need
E6-E96 value series
E6, E12, E24, E48, E96 tables and the nearest standard value
pF, nF and µF converter
capacitance in picofarads, nanofarads and microfarads and the code on the case
LED resistor
resistance, standard value and resistor power
Voltage divider
output from R1 and R2 or picking a pair from a series, ADC check