olerast PULSE

My own portable radio gadget: it receives and records Wi-Fi, Sub-GHz, nRF24 and LoRa signals with GNSS coordinates, helps to analyse a network and works as an IR remote.

in developmentclosed sourcehardware and robots

A concept of the olerast PULSE gadget with a screen and three antennas
A concept render of the case, not a photo and not a finished gadget

About the project

For radio amateurs and people who build electronics: to see what is happening on the air, record a session with coordinates, test your own radio link, receive and replay an IR remote.

Try it in a minute

The code is closed and the gadget is not built yet: there is research and an initial firmware skeleton. There is nothing to test for now.

Limitations

  • Research stage: there is no board schematic and nothing has run on hardware.
  • The radio, screen, GNSS and IR are not written in the firmware yet, there is only a skeleton of two apps.
  • The pins, modules and battery are not finally chosen yet, a budget of about 100 dollars is the target for now.

What it is made of

  • ESP32-S3 with PSRAM: screen, SD card, USB, nRF24, CC1101, IR
  • ESP32-C5: Wi-Fi 2.4 and 5 GHz, BLE, LoRa on SX1262, GNSS
  • EBYTE E01 (nRF24) and CC1101 (Sub-GHz) radio modules
  • A screen of about 3.5", 480×320
  • A battery of about 4000 mAh, USB-C charging