3D print cost
Plastic, power, wear and rejects: the price of one part.
How cost is calculated
Filament = part weight × spool price / filament weight on the spool. Electricity = power in watts / 1000 × time in hours × rate. Wear = time × wear per hour: nozzles, belts, bed surface and the printer itself, divided by print hours. The sum is divided by (1 − failure rate / 100), so with a 5 % failure rate by 0.95. The calculator doesn't show a per-gram price; for that, divide the total by the part weight.
Take the weight and print time from the slicer after slicing, or from the G-code. The G-code viewer at /tools/model shows the time and filament use the slicer wrote, and its own estimate from the commands. The link "Print cost with electricity and wear" carries the weight and time into this calculator.
Examples
- A 50 g part from a 1000 g spool at 1500 ₽, 3 hours at 120 W and a rate of 6 ₽/kWh, wear 5 ₽/h, failure rate 5 %: filament 75 ₽, electricity 2.16 ₽, wear 15 ₽, total 97.01 ₽, or 1.94 ₽ per gram.
- A 120 g part over 6.5 hours at 80 W: the printer uses 0.52 kWh costing 3.12 ₽, filament 180 ₽, wear 32.5 ₽, total 226.97 ₽.
- With a 50 % markup, a part costing 97.01 ₽ costs the customer 97.01 × 1.5 = 145.52 ₽.
Common mistakes
- People calculate electricity from the power supply's rating. The printer draws full power while heating the bed and nozzle, and the average power over the whole print is lower.
- People count only filament and electricity. For a 50 g part over 3 hours, wear and failures add 19.85 ₽ out of 97.01 ₽, a fifth of the price.
- People take the weight from the model volume. The slicer also counts supports, skirt, brim and purge tower, and more filament gets used.
FAQ
- How much does a gram of 3D printing cost?
- The calculator's total divided by the part weight. With a 1500 ₽ spool per 1 kg, filament costs 1.5 ₽ per gram. With electricity, wear of 5 ₽/h and a 5 % failure rate, a 50 g part over 3 hours comes to 1.94 ₽ per gram.
- How do I price a custom order with a markup?
- The calculator computes cost. The price for the customer is that multiplied by (1 + markup): with a 50 % markup a part costing 97 ₽ sells for 145.5 ₽. Count the time for modeling, post-processing and packing separately.
- How much electricity does a 3D printer use?
- Energy = average power × time. For the Original Prusa MK4S the specifications give 80 W when printing PLA and 120 W with ABS: 6 hours of PLA is 0.48 kWh, which at a rate of 6 ₽ is 2.88 ₽. A watt meter in the socket will show your own printer's power over a whole print.
- Where do I get the weight and print time?
- From the slicer after slicing: Cura, PrusaSlicer, OrcaSlicer and Bambu Studio show the time and filament use. If you only have G-code, open it in the viewer at /tools/model, which gives time and weight from the slicer's data and from the commands, and the link carries them into this calculator.