SS34 Schottky diode pinout
SS34 Schottky diode (40 V, 3 A, SMA), SS34, 5 V logic, 6.2×3.2 mm, 2 pins
partly verified17.10.2026
Important
- The stripe is the cathode. Used at the power input for reverse polarity protection and in buck converters.
- Does not fit a breadboard: solder it to a board or use an SMA adapter.
All pins
| Label | Number | Functions | Limits | Check |
|---|---|---|---|---|
| K | pin 1 | Cathode: on the stripe side | not from manufactureronsemi makes the SS34 in an SMC package; Chinese manufacturers make it in SMA (same 40 V and 3 A), the cathode is marked by a stripe in the same way. | |
| A | pin 2 | Anode | not from manufactureronsemi makes the SS34 in an SMC package; Chinese manufacturers make it in SMA (same 40 V and 3 A), the cathode is marked by a stripe in the same way. |
Sources
Not verified against the manufacturer: 2 of 2 pins. The pin card says what confirms each one and where sources disagree.
- onsemi SS32–S310 Schottky Rectifiers (Rev. 5, August 2021)datasheet, checked 17.10.20261 cathode, 2 anode; SS34: VRRM 40 V, IF(AV) 3 A, VF 500 mV at 3 A; SMC package
- Shenzhen Slkormicro SS34, DO-214AC (SMA), DigiKeythird-party source, checked 17.10.2026SS34 in SMA: 40 V, 3 A, 500 mV at 3 A
Size: SMA: package 4.3×2.6 mm, 5.2 mm with leads (approximate).



