1N47xxA zener diode pinout
1N47xxA zener diode (1 W, DO-41), voltage is a parameter, 1N47xxA zener diode, 5 V logic, 12.7×3.8 mm, 2 pins
verified17.10.2026
Lying flat, stripe (cathode) on the left.
Download PNG- Chip
- 1N47xxA zener diode
- Logic
- 5 V
Important
- Works in reverse bias: cathode (stripe) to positive through a resistor, anode to ground. The voltage across it is the zener voltage.
- Without a resistor from the source it burns out: R = (Uin − Uz) / I, current 5–20 mA. Weak for powering a circuit: use a regulator instead.
- ADC or GPIO input protection: a 1–10 kΩ resistor in series and a 3.3 V zener to ground.
All pins
Sources
Every pin is verified against the manufacturer's documents.
- Vishay 1N4728A to 1N4764A Zener Diodes (Rev. 2.7, 07-Nov-2024)datasheet, checked 17.10.2026DO-41, stripe is the cathode; 1 W; 1N4728A 3.3 V, 1N4733A 5.1 V (49 mA test, 178 mA maximum)…
Size: DO-41: package 5.2×2.7 mm, leads bent to 10.16 mm spacing (4 holes) (approximate).



