2N3906 transistor pinout
2N3906 transistor (PNP, TO-92), 2N 3906, 5 V logic, 7.2×11.5 mm, 3 pins
verified17.10.2026
View of the flat marked side, pins down: E-B-C left to right.
Download PNG- Chip
- 2N 3906
- Logic
- 5 V
Important
- High-side switch (PNP): emitter to the positive supply, load between the collector and GND, base through a resistor to a GPIO, turns on with LOW. If the supply is higher than the pin's logic level (5 V with a 3.3 V ESP32), the PNP won't turn off: add an extra NPN.
All pins
| Label | Number | Functions | Limits | Check |
|---|---|---|---|---|
| E | pin 1 | Emitter: to the positive supply | verifiedLabelled on other revisions as: emitter, 1 | |
| B | pin 2 | Base: through a 1–10 kΩ resistor to a GPIO (a PNP turns on with a low level) | verifiedLabelled on other revisions as: base, 2 | |
| C | pin 3 | Collector | verifiedLabelled on other revisions as: collector, 3 |
Sources
Every pin is verified against the manufacturer's documents.
- onsemi 2N3906 General Purpose Transistors PNP (Rev. 4, February 2010)datasheet, checked 17.10.2026TO-92 STYLE 1: 1 emitter, 2 base, 3 collector; −40 V, −200 mA
Size: TO-92 package 4.8×4.6 mm, leads spread to 2.54 mm pitch (the package pitch is 1.27 mm) (approximate).



