BC547 transistor pinout
BC547 transistor (NPN, TO-92), BC 547, 5 V logic, 7.2×11.5 mm, 3 pins
verified17.10.2026
View of the flat marked side, pins down: C-B-E left to right.
Download PNG- Chip
- BC 547
- Logic
- 5 V
Important
- Low-side switch (NPN): emitter to GND, load between the positive supply and the collector, base through a 1–4.7 kΩ resistor to a GPIO. For a relay coil or motor, add a diode (1N4007) with the cathode to the positive supply.
- Collector current up to 100 mA: LEDs, relays up to 70 mA, an active buzzer. For a motor or a bigger relay use a 2N2222A or a MOSFET.
- Pin order C-B-E on BC547 and BC557; on 2N2222A (PN2222A), 2N3904, S8050 it is E-B-C. Mix them up and the transistor will not turn on or will burn out.
All pins
Sources
Every pin is verified against the manufacturer's documents.
- onsemi BC546B, BC547A, B, C, BC548B, C (Rev. 8, August 2021)datasheet, checked 17.10.2026TO-92 STYLE 17: 1 collector, 2 base, 3 emitter; BC547: 45 V, 100 mA, hFE 110-800
- Diotec BC546 … BC549 (Version 2026-03-30)datasheet, checked 17.10.2026BC547: VCEO 45 V, IC 100 mA, ICM 200 mA, Ptot 500 mW
Size: TO-92 package 4.8×4.6 mm, leads spread to 2.54 mm pitch (the package pitch is 1.27 mm) (approximate).



