BC557 transistor pinout

BC557 transistor (PNP, TO-92), BC 557, 5 V logic, 7.2×11.5 mm, 3 pins

verified17.10.2026

View of the flat marked side, pins down: C-B-E left to right.

Download PNG
Chip
BC 557
Logic
5 V

Important

  • High-side switch (PNP): emitter to the positive supply, load between the collector and GND, base through a resistor to a GPIO, turns on with LOW. If the supply is higher than the pin's logic level (5 V with a 3.3 V ESP32), the PNP won't turn off: add an extra NPN.
  • Complement of the BC547 with the same C-B-E pinout.

All pins

LabelNumberFunctionsLimitsCheck
Cpin 1Collectorverified
Bpin 2Base: through a 1–10 kΩ resistor to a GPIO (a PNP turns on with a low level)verified
Epin 3Emitter: to the positive supplyverified

Sources

Every pin is verified against the manufacturer's documents.

Size: TO-92 package 4.8×4.6 mm, leads spread to 2.54 mm pitch (the package pitch is 1.27 mm) (approximate).

You might also need

Similar boards