Active buzzer 12 mm pinout

Active buzzer 12 mm, 5 V (built-in oscillator), Active beeper, 5 V logic, 12.4×12.4 mm, 2 pins

partly verified17.10.2026

Top view, "+" on the left.

Download PNG
Chip
Active beeper
Logic
5 V

Important

  • Sounds by itself from a DC voltage: digitalWrite(HIGH). With tone() it sounds hoarse: for melodies you need a passive one.
  • Polarized: "+" (long lead) to positive. Up to 30 mA is more than is advised to draw from one pin: better through a transistor (S8050, BC547) or a buzzer module.
  • How to tell it from a passive one: the bottom is sealed (no board), and it sounds at once from a 3–5 V battery.

All pins

LabelNumberFunctionsLimitsCheck
+pin 1Positive: long lead, "+" on the casenot from manufacturer
−pin 2Negativenot from manufacturer

Sources

Not verified against the manufacturer: 2 of 2 pins. The pin card says what confirms each one and where sources disagree.

Size: Ø12 mm, pins 7.6 mm apart drawn at 7.62 (approximate).

You might also need

Similar boards