4-position DIP switch pinout
4-position DIP switch, DIP switch 4 pos., 5 V logic, 11.16×10.16 mm, 8 pins
partly verified17.10.2026
Top view, ON label at the top: pins 1…n along the bottom left to right, n+1…2n along the top right to left, rotated 90° on the diagram.
BuyDownload PNG- Chip
- DIP switch 4 pos.
- Logic
- 5 V
Important
- Position k connects the bottom pin k to the top pin 9-k when the slider is moved toward the ON marking.
- For settings: all bottom pins to GND, top pins to GPIOs with INPUT_PULLUP: ON = LOW.
- The number of positions is changed on the part in the builder (2, 4, 6, 8): wires on the remaining positions are kept.
All pins
| Label | Number | Functions | Limits | Check |
|---|---|---|---|---|
| 8 | pin 8 | Position 1, top pin | not from manufacturerPin numbering follows the standard DIP layout (as in KiCad and the CTS 206); the manufacturer datasheet could not be downloaded. | |
| 7 | pin 7 | Position 2, top pin | not from manufacturerPin numbering follows the standard DIP layout (as in KiCad and the CTS 206); the manufacturer datasheet could not be downloaded. | |
| 6 | pin 6 | Position 3, top pin | not from manufacturerPin numbering follows the standard DIP layout (as in KiCad and the CTS 206); the manufacturer datasheet could not be downloaded. | |
| 5 | pin 5 | Position 4, top pin | not from manufacturerPin numbering follows the standard DIP layout (as in KiCad and the CTS 206); the manufacturer datasheet could not be downloaded. | |
| 1 | pin 1 | Position 1, bottom pin | not from manufacturerPin numbering follows the standard DIP layout (as in KiCad and the CTS 206); the manufacturer datasheet could not be downloaded. | |
| 2 | pin 2 | Position 2, bottom pin | not from manufacturerPin numbering follows the standard DIP layout (as in KiCad and the CTS 206); the manufacturer datasheet could not be downloaded. | |
| 3 | pin 3 | Position 3, bottom pin | not from manufacturerPin numbering follows the standard DIP layout (as in KiCad and the CTS 206); the manufacturer datasheet could not be downloaded. | |
| 4 | pin 4 | Position 4, bottom pin | not from manufacturerPin numbering follows the standard DIP layout (as in KiCad and the CTS 206); the manufacturer datasheet could not be downloaded. |
Sources
Not verified against the manufacturer: 8 of 8 pins. The pin card says what confirms each one and where sources disagree.
- KiCad library: Button_Switch_THT SW_DIP_SPSTxNN_Slide_W7.62mm_P2.54mmthird-party source, checked 17.10.2026DIP: rows 7.62 mm apart, 2.54 mm pitch; numbering 1…n along one side, n+1…2n along the other in the opposite direction, switch k between k and 2n+1−k
Size: DIP package, rows 7.62 mm apart, 2.54 mm pitch (approximate).



