IRLZ44N MOSFET pinout
IRLZ44N MOSFET (N-channel, logic level, TO-220), IRLZ44N, 5 V logic, 10.2×23 mm, 3 pins
verified17.10.2026
View of the marking, tab at the top, pins down: G, D, S from left to right.
Download PNG- Chip
- IRLZ44N
- Logic
- 5 V
Important
- Low-side switch: S to GND, load between positive and D, gate from GPIO through 100–220 Ω and 10–100 kΩ from gate to GND (keeps it off at startup).
- From 5 V (Arduino) it turns on fully. From 3.3 V (ESP32, Pico) the channel resistance is not guaranteed: it works up to 1–2 A, at higher currents it heats up: better use the AO3400 or a gate driver.
- The tab is connected to the drain: the heatsink is at the load voltage, mount it with an insulating pad.
All pins
Sources
Every pin is verified against the manufacturer's documents.
- Infineon IRLZ44NPbF HEXFET Power MOSFET (PD-94782)datasheet, checked 17.10.2026TO-220AB: G, D, S; 55 V, 47 A; Vgs(th) 1.0–2.0 V; Rds(on) 22 mΩ at 10 V, 25 mΩ at 5 V, 35 mΩ at 4 V; Vgs ±16 V
Size: TO-220 package 10×15.2 mm, pins shortened (approximate).



