3 mm single-color LED pinout

3 mm single-color LED, 3 mm LED, 5 V logic, 6.4×13.36 mm, 2 pins

verified17.10.2026

Side view, leads down: cathode (short, flat edge) on the left, anode (long) on the right.

Download PNG
Chip
3 mm LED
Logic
5 V

Important

  • Anode is the long lead, cathode is the short one, on the flat-edge side of the rim; inside the bulb the cathode is the larger "cup".
  • Without a resistor the LED will burn out or damage the pin: from 3.3 V a red LED needs about 150 Ω for 10 mA, from 5 V 330 Ω.
  • Forward voltage at 20 mA (Kingbright): red 1.85 V, yellow 2.0 V, green 2.2 V, blue and white 3.3 V (up to 4 V). Blue and white are dim at 3.3 V.

All pins

LabelNumberFunctionsLimitsCheck
Kpin 1Cathode (−): short lead, flat edge on the rimverified
Apin 2Anode (+): long leadverified

Sources

Every pin is verified against the manufacturer's documents.

  • Kingbright WP710A10SRD/D (T-1, 3 mm)datasheet, checked 17.10.20263 mm, leads 2.54 apart, the long lead is the anode, the flat side is the cathode; red 1.85 V (up to 2.5) at 20 mA

Size: bulb and rim per the datasheet, leads shortened; the anode is longer by 2.54 (approximate).

You might also need

Similar boards