5 mm single-color LED pinout
5 mm single-color LED, 5 mm LED, 5 V logic, 6.4×15.899999999999999 mm, 2 pins
verified17.10.2026
Side view, leads down: cathode (short, flat edge) on the left, anode (long) on the right.
BuyDownload PNG- Chip
- 5 mm LED
- Logic
- 5 V
Important
- Anode is the long lead, cathode is the short one, on the flat-edge side of the rim; inside the bulb the cathode is the larger "cup".
- Without a resistor the LED will burn out or damage the pin: from 3.3 V a red LED needs about 150 Ω for 10 mA, from 5 V 330 Ω.
- Forward voltage at 20 mA (Kingbright): red 1.85 V, yellow 2.0 V, green 2.2 V, blue and white 3.3 V (up to 4 V). Blue and white are dim at 3.3 V.
All pins
Sources
Every pin is verified against the manufacturer's documents.
- Kingbright WP7113SRD/D, SGD, SYD, QBC/D, QWC/D (T-1 3/4, 5 mm)datasheet, checked 17.10.20265 mm, leads 2.54 apart (where they leave the body), the long lead is the anode, the flat edge is the cathode; Vf at 20 mA: red 1.85 (up to 2.5), green 2.2, yellow 2.0, blue and white 3.3 (up to 4.0) V; 20 mA
Size: bulb and rim per the datasheet, leads shortened; the anode is longer by 2.54 (approximate).



