2N2222A / PN2222A transistor pinout

2N2222A / PN2222A transistor (NPN, TO-92, E-B-C), 2N 2222A, 5 V logic, 7.2×11.5 mm, 3 pins

verified17.10.2026

View of the flat marked side, pins down: E-B-C left to right.

Download PNG
Chip
2N 2222A
Logic
5 V

Important

  • Low-side switch (NPN): emitter to GND, load between the positive supply and the collector, base through a 1–4.7 kΩ resistor to a GPIO. For a relay coil or motor, add a diode (1N4007) with the cathode to the positive supply.
  • Current up to 500-600 mA: relays, small motors, strips with a few LEDs. Base resistor 330 Ω-1 kΩ from 3.3 V for 100-300 mA.
  • Note: the onsemi P2N2222A in the same TO-92 is C-B-E (part p2n2222a-to92). Look for the letter P before 2N on the case.

Revisions and clones

  • P2N2222A (onsemi): C-B-E, a separate part p2n2222a-to92.
  • 2N2222A in a metal TO-18: leads in a circle, the emitter is next to the tab.

All pins

LabelNumberFunctionsLimitsCheck
Epin 1Emitter: to GNDverified
Bpin 2Base: through a 1–10 kΩ resistor to a GPIOverified
Cpin 3Collectorverified

Sources

Every pin is verified against the manufacturer's documents.

Size: TO-92 package 4.8×4.6 mm, leads spread to 2.54 mm pitch (the package pitch is 1.27 mm) (approximate).

You might also need

Similar boards