WH148 potentiometer pinout

WH148 potentiometer (16 mm, B10K and others), Potentiometer, 5 V logic, 16.4×20.4 mm, 3 pins

partly verified17.10.2026

View from the shaft side, pins down: 1 on the left, 2 (wiper) in the middle, 3 on the right.

Download PNG
Chip
Potentiometer
Logic
5 V

Important

  • Connecting to an ADC: 1 to GND, 3 to 3.3 V (ESP32, Pico) or 5 V (Arduino), 2 to the ADC input.
  • B is linear (for settings, joysticks), A is logarithmic (volume). Marking on the body: "B10K" = linear 10 kΩ.
  • For an ESP32 ADC, 10 kΩ or less is better: the ADC has a large input leakage current, and with 100 kΩ the readings drift.

All pins

LabelNumberFunctionsLimitsCheck
1pin 1Trace edgenot from manufacturer
2pin 2Wiper (middle pin)not from manufacturer
3pin 3Trace edgenot from manufacturer

Sources

Not verified against the manufacturer: 3 of 3 pins. The pin card says what confirms each one and where sources disagree.

Size: Ø16 mm body; the pins 5 mm apart are drawn at 5.08 (two breadboard holes) (approximate).

You might also need

Similar boards