S8050 transistor pinout
S8050 transistor (NPN, TO-92, E-B-C), S8050 D331, 5 V logic, 7.2×11.5 mm, 3 pins
verified17.10.2026
View of the flat marked side, pins down: E-B-C left to right.
Download PNG- Chip
- S8050 D331
- Logic
- 5 V
Important
- Low-side switch (NPN): emitter to GND, load between the positive supply and the collector, base through a 1–4.7 kΩ resistor to a GPIO. For a relay coil or motor, add a diode (1N4007) with the cathode to the positive supply.
- Often found on buzzer and relay modules. Current up to 500 mA (SS8050 up to 1.5 A).
- The same JCET also makes the 8050S with E-C-B order: read the marking on the package.
Revisions and clones
- 8050S (JCET): E-C-B.
- SS8050: E-B-C, current up to 1.5 A.
All pins
Sources
Every pin is verified against the manufacturer's documents.
- JCET S8050 TO-92 Plastic-Encapsulate Transistors (B, Aug 2012, Robu copy)datasheet, checked 17.10.2026TO-92: 1 emitter, 2 base, 3 collector; VCEO 25 V, IC 0.5 A, 625 mW
- onsemi SS8050 NPN Epitaxial Silicon Transistor (Rev. 2, February 2022)datasheet, checked 17.10.2026TO-92: 1 Emitter, 2 Base, 3 Collector; 25 V, 1.5 A
Size: TO-92 package 4.8×4.6 mm, leads spread to 2.54 mm pitch (the package pitch is 1.27 mm) (approximate).



