DD4012SA mini buck module pinout

DD4012SA mini buck module, 3.3 V (up to 1 A, 3 pins), unmarked (controller in SOT-23-6), 3.3 V logic, 16×11 mm, 3 pins

partly verified17.10.2026

Top view, pins on the left.

Download PNG
Chip
unmarked (controller in SOT-23-6)
Logic
3.3 V
Power
VIN 5-40 V

Important

  • A handy replacement for the LM7805 and AMS1117: it doesn't get hot from 12 V. The input must be 1.5–2 V above the output.
  • 3.3 V and 5 V modules look the same: check the marking on the board or measure the output with no load.
  • Geometry from seller descriptions (±0.5 mm), components drawn approximately. Check with calipers before laying out your own board.
  • Fixed output, no trimmer.

All pins

LabelNumberFunctionsLimitsCheck
VIN12 Vpower inputnot verified
GNDGroundnot verified
VOUT3.3 Vpower outputnot verified

Sources

Not verified against the manufacturer: 3 of 3 pins. The pin card says what confirms each one and where sources disagree.

Size: about 16×11 mm from seller photos, not dimensioned (approximate).

You might also need

Similar boards