LM7805 regulator pinout
LM7805 regulator (5 V, TO-220), LM7805, 5 V logic, 10.2×23 mm, 3 pins
verified17.10.2026
View of the marking, tab at the top, pins down: 1 on the left.
Download PNG- Chip
- LM7805
- Logic
- 5 V
- Power
- IN (pin 1) 7-35 V
Important
- Pin order (looking at the marking): IN, GND, OUT. The LM7905 (minus 5 V) has a different order: GND, IN, OUT.
- From 2×18650 (7.4 V) it still holds 5 V, from discharged ones (6 V) it no longer does. From a 9 V battery it works, but that battery has little capacity.
- Efficiency = 5 / Vin: from 12 V about 40 %, the rest goes to heat. For batteries a switching buck module is better.
- Dissipates (Vin − 5) × I: from 12 V at 0.5 A that is 3.5 W, so it overheats without a heatsink (about 50 °C/W).
Revisions and clones
- 78M05 (up to 0.5 A, DPAK or TO-220) and L78L05 (up to 0.1 A, TO-92 with a different order: OUT, GND, IN): check the datasheet.
All pins
| Label | Number | Functions | Limits | Check |
|---|---|---|---|---|
| IN | pin 1 | 12 V | power input | verifiedInput 7–35 V. Add a 0.33 µF capacitor at the pin if the wire from the source is longer than 10–15 cm.Labelled on other revisions as: INPUT, VIN, 1 |
| GND | pin 2 | Ground | verifiedGround. The tab is connected to this pin.Labelled on other revisions as: COMMON, 2 | |
| OUT | pin 3 | 5 V | power output | verified5 V output, up to 1.5 A with a heatsink. 0.1 µF capacitor at the pin.Labelled on other revisions as: OUTPUT, VOUT, 3 |
Sources
Every pin is verified against the manufacturer's documents.
- TI LM340, LM340A, LM7805 datasheet (SNOSBT0L, 2016)datasheet, checked 17.10.2026TO-220: 1 INPUT, 2 GND, 3 OUTPUT; input up to 35 V, LM7805 needs 7.5 V or more (2 V dropout at 1 A), current up to 1.5 A, quiescent current 5–8 mA
Size: TO-220 package 10×15.2 mm per datasheet, leads shortened (approximate).



