MAX4466 microphone with amplifier pinout
MAX4466 microphone with amplifier (Adafruit 1063), Maxim MAX4466, 3.3 V logic, 13.97×21.59 mm, 3 pins
verified17.10.2026
View from the microphone side (front per Adafruit), pin row at the bottom; trimmer on the back.
Download PNG- Chip
- Maxim MAX4466
- Logic
- 3.3 V
- Power
- VCC 2.4-5.5 V
Important
- Gain trimmer (25-125x) on the back side, turn it with a small screwdriver.
- The output is analog, the sound level sits around VCC/2: sample the ADC fast (several kHz) or measure the peak-to-peak swing.
- Pin order on the front from left to right: OUT, GND, VCC; the labels on the back are the same, read in reverse order.
Revisions and clones
- GY-MAX4466 clones copy the Adafruit board; on some the trimmer is on the front. Check the labels by the header.
All pins
| Label | Number | Functions | Limits | Check |
|---|---|---|---|---|
| OUT | Audio output: DC bias of VCC/2, swing up to VCCto an ADC input | verifiedThe output swings up to the supply voltage: at VCC 5 V do not connect it to a 3.3 V ADC input (ESP32, Pico), power the module from 3.3 V.DC blocking (100 µF) is needed only if the input requires it. | ||
| GND | Ground | verified | ||
| VCC | 3.3 V | power input | verified |
Sources
Every pin is verified against the manufacturer's documents.
- Adafruit: Adafruit MAX4466 Mic Amp.brd (Eagle)board drawing, checked 17.10.2026outline 13.97×21.59, row VCC, GND, OUT at y 20.07, Ø9.7 microphone and 100 kΩ trimmer on opposite sides, Ø2.5 holes
- Adafruit: Electret Microphone Amplifier - MAX4466 (1063)user guide, checked 17.10.2026supply 2.4-5 V, gain 25-125x set by the trimmer on the back, output biased at VCC/2, up to 5 V swing
- Adafruit Learn: Adafruit Microphone Amplifier Breakoutuser guide, checked 17.10.2026OUT to an analog input, powered from 3.3 V as the quietest supply
- Analog Devices (Maxim): MAX4466, chip page and the MAX4465-MAX4469 datasheetdatasheet, checked 17.10.2026supply 2.4-5.5 V, current 24 µA, rail-to-rail output
Size: per the Eagle outline.
FAQ
- What supply voltage does the MAX4466 microphone with amplifier need?
- VCC: 2.4-5.5 V. 3.3 V logic.



