SS-12D00 slide switch pinout
SS-12D00 slide switch (SPDT, 3 pins), SS-12D00, 5 V logic, 8.6×9.6 mm, 3 pins
verified17.10.2026
Front view, slider up, leads down: 1, 2 (common), 3.
BuyDownload PNG- Chip
- SS-12D00
- Logic
- 5 V
Important
- The middle pin is common: it is connected to one of the outer pins depending on the slider position.
- Power switch: source positive to 2, load to 1 (3 free). Current up to 0.3 A: borderline for an ESP32 with Wi-Fi, not enough for motors.
- As a GPIO input: 2 to the GPIO, 1 to GND, 3 to 3.3 V: no pull-up is needed, the level is always defined.
All pins
Sources
Every pin is verified against the manufacturer's documents.
- Vimex SS-12D00 Slide Switch (1P2T), 1999 specificationdatasheet, checked 17.10.2026three leads 2.5 mm apart, the middle one common (A is 1–2, B is 2–3); 8.5×3.5 mm; DC 30 V 0.3 A
Size: body 8.5×3.5 mm per Vimex, leads 2.5 mm apart are drawn at 2.54 (approximate).



