Bare TCRT5000 reflective optical sensor pinout
Bare TCRT5000 reflective optical sensor (4 pins), Vishay TCRT5000, 5 V logic, 10.2×5.8 mm, 4 pins
verified17.10.2026
Top view (lens side), phototransistor on the left, LED on the right.
Download PNG- Chip
- Vishay TCRT5000
- Logic
- 5 V
- Power
- A (LED anode)
Important
- LED only through a resistor, phototransistor with a pull-up to supply. A ready module with an LM393 does this itself.
- No pin labels on the case: use the lens color (LED blue or clear, phototransistor black) and the cut corner as a guide.
All pins
| Label | Number | Functions | Limits | Check |
|---|---|---|---|---|
| C | Phototransistor collector: to a GPIO with a pull-up or to an ADC | verified10 kΩ pull-up to supply (or INPUT_PULLUP): the level drops on a light surface. | ||
| E | Phototransistor emitter: to ground | verified | ||
| A | IR LED anode: through a resistor to supply | verifiedOnly through a resistor: 5 V with 220 Ω (about 17 mA), 3.3 V with 100 Ω. Forward current no more than 60 mA. | ||
| K | IR LED cathode: to ground | verifiedLabelled on other revisions as: C (cathode) |
Sources
Every pin is verified against the manufacturer's documents.
- Vishay TCRT5000 datasheet (Rev 1.7)datasheet, checked 17.10.2026package 10.2×5.8×7, top view: phototransistor (C, E) and IR LED (A, C), forward current up to 60 mA, best range 2.5 mm (0.2–15 mm)
- KiCad: OptoDevice Vishay_TCRT5000.kicad_mod (official library)third-party source, checked 17.10.20262×2 pins: 2.54 pitch inside a pair, 5.5 mm between pairs, 10.2×5.8 case
Size: 10.2×5.8×7 case per Vishay; pins per the KiCad footprint.



