MTS-102 toggle switch pinout
MTS-102 toggle switch (SPDT ON-ON, 3 pins), MTS-102, 5 V logic, 13.2×24.5 mm, 3 pins
partly verified17.10.2026
Side view, lever up, lugs down: 1, 2 (common), 3.
BuyDownload PNG- Chip
- MTS-102
- Logic
- 5 V
Important
- The middle lug is common; the lever connects it to the opposite outer lug (lever left: 2 and 3 connected).
- Lugs for soldering wires: does not fit a breadboard.
All pins
| Label | Number | Functions | Limits | Check |
|---|---|---|---|---|
| 1 | pin 1 | Outer: connected to 2 when the lever is tilted toward 3 | not from manufacturerThere is no manufacturer datasheet with a drawing; the 4.7 mm pitch is from Jameco. The middle lug is common on all SPDT toggle switches. | |
| 2 | pin 2 | Common (middle) | not from manufacturerThere is no manufacturer datasheet with a drawing; the 4.7 mm pitch is from Jameco. The middle lug is common on all SPDT toggle switches.Labelled on other revisions as: COM | |
| 3 | pin 3 | Outer: connected to 2 when the lever is tilted toward 1 | not from manufacturerThere is no manufacturer datasheet with a drawing; the 4.7 mm pitch is from Jameco. The middle lug is common on all SPDT toggle switches. |
Sources
Not verified against the manufacturer: 3 of 3 pins. The pin card says what confirms each one and where sources disagree.
- Ningbo MTS-102-A2 spec sheet (Comet Electronics)third-party source, checked 17.10.2026SPDT ON-ON, 6 A 125 V~, 3 A 250 V~, electrical life 10,000 cycles
- Jameco GTS103-P-R Mini Toggle Switch SPDT (MTS102)third-party source, checked 17.10.2026lug pitch 0.185″ (4.7 mm)
Size: body about 13×8 mm, M6 thread, lugs 4.7 mm apart (does not fit a breadboard) (approximate).



